diff --git a/setup.sh b/scripts/bootstrap/setup.sh
similarity index 100%
rename from setup.sh
rename to scripts/bootstrap/setup.sh
diff --git a/scripts/bootstrap/void.sh b/scripts/bootstrap/void.sh
new file mode 100644
index 0000000..5304772
--- /dev/null
+++ b/scripts/bootstrap/void.sh
@@ -0,0 +1,1576 @@
+#!/bin/bash
+#-
+# Copyright (c) 2012-2015 Juan Romero Pardines <xtraeme@gmail.com>.
+#               2012 Dave Elusive <davehome@redthumb.info.tm>.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#-
+
+# Make sure we don't inherit these from env.
+SOURCE_DONE=
+HOSTNAME_DONE=
+KEYBOARD_DONE=
+LOCALE_DONE=
+TIMEZONE_DONE=
+ROOTPASSWORD_DONE=
+USERLOGIN_DONE=
+USERPASSWORD_DONE=
+USERNAME_DONE=
+USERGROUPS_DONE=
+USERACCOUNT_DONE=
+BOOTLOADER_DONE=
+PARTITIONS_DONE=
+NETWORK_DONE=
+FILESYSTEMS_DONE=
+MIRROR_DONE=
+
+TARGETDIR=/mnt/target
+LOG=/dev/tty8
+CONF_FILE=/tmp/.void-installer.conf
+if [ ! -f $CONF_FILE ]; then
+    touch -f $CONF_FILE
+fi
+ANSWER=$(mktemp -t vinstall-XXXXXXXX || exit 1)
+TARGET_FSTAB=$(mktemp -t vinstall-fstab-XXXXXXXX || exit 1)
+
+trap "DIE" INT TERM QUIT
+
+# disable printk
+if [ -w /proc/sys/kernel/printk ]; then
+    echo 0 >/proc/sys/kernel/printk
+fi
+
+# Detect if this is an EFI system.
+if [ -e /sys/firmware/efi/systab ]; then
+    EFI_SYSTEM=1
+    EFI_FW_BITS=$(cat /sys/firmware/efi/fw_platform_size)
+    if [ $EFI_FW_BITS -eq 32 ]; then
+        EFI_TARGET=i386-efi
+    else
+        EFI_TARGET=x86_64-efi
+    fi
+fi
+
+# dialog colors
+BLACK="\Z0"
+RED="\Z1"
+GREEN="\Z2"
+YELLOW="\Z3"
+BLUE="\Z4"
+MAGENTA="\Z5"
+CYAN="\Z6"
+WHITE="\Z7"
+BOLD="\Zb"
+REVERSE="\Zr"
+UNDERLINE="\Zu"
+RESET="\Zn"
+
+# Properties shared per widget.
+MENULABEL="${BOLD}Use UP and DOWN keys to navigate \
+menus. Use TAB to switch between buttons and ENTER to select.${RESET}"
+MENUSIZE="14 60 0"
+INPUTSIZE="8 60"
+MSGBOXSIZE="8 70"
+YESNOSIZE="$INPUTSIZE"
+WIDGET_SIZE="10 70"
+
+DIALOG() {
+    rm -f $ANSWER
+    dialog --colors --keep-tite --no-shadow --no-mouse \
+        --backtitle "${BOLD}${WHITE}Void Linux installation -- https://www.voidlinux.org (@@MKLIVE_VERSION@@)${RESET}" \
+        --cancel-label "Back" --aspect 20 "$@" 2>$ANSWER
+    return $?
+}
+
+INFOBOX() {
+    # Note: dialog --infobox and --keep-tite don't work together
+    dialog --colors --no-shadow --no-mouse \
+        --backtitle "${BOLD}${WHITE}Void Linux installation -- https://www.voidlinux.org (@@MKLIVE_VERSION@@)${RESET}" \
+        --title "${TITLE}" --aspect 20 --infobox "$@"
+}
+
+DIE() {
+    rval=$1
+    [ -z "$rval" ] && rval=0
+    clear
+    rm -f $ANSWER $TARGET_FSTAB
+    # reenable printk
+    if [ -w /proc/sys/kernel/printk ]; then
+        echo 4 >/proc/sys/kernel/printk
+    fi
+    umount_filesystems
+    exit $rval
+}
+
+set_option() {
+    if grep -Eq "^${1}.*" $CONF_FILE; then
+        sed -i -e "/^${1}.*/d" $CONF_FILE
+    fi
+    echo "${1} ${2}" >>$CONF_FILE
+}
+
+get_option() {
+    echo $(grep -E "^${1}.*" $CONF_FILE | sed -e "s|${1}||")
+}
+
+# ISO-639 language names for locales
+iso639_language() {
+    case "$1" in
+    aa) echo "Afar" ;;
+    af) echo "Afrikaans" ;;
+    an) echo "Aragonese" ;;
+    ar) echo "Arabic" ;;
+    ast) echo "Asturian" ;;
+    be) echo "Belgian" ;;
+    bg) echo "Bulgarian" ;;
+    bhb) echo "Bhili" ;;
+    br) echo "Breton" ;;
+    bs) echo "Bosnian" ;;
+    ca) echo "Catalan" ;;
+    cs) echo "Czech" ;;
+    cy) echo "Welsh" ;;
+    da) echo "Danish" ;;
+    de) echo "German" ;;
+    el) echo "Greek" ;;
+    en) echo "English" ;;
+    es) echo "Spanish" ;;
+    et) echo "Estonian" ;;
+    eu) echo "Basque" ;;
+    fi) echo "Finnish" ;;
+    fo) echo "Faroese" ;;
+    fr) echo "French" ;;
+    ga) echo "Irish" ;;
+    gd) echo "Scottish Gaelic" ;;
+    gl) echo "Galician" ;;
+    gv) echo "Manx" ;;
+    he) echo "Hebrew" ;;
+    hr) echo "Croatian" ;;
+    hsb) echo "Upper Sorbian" ;;
+    hu) echo "Hungarian" ;;
+    id) echo "Indonesian" ;;
+    is) echo "Icelandic" ;;
+    it) echo "Italian" ;;
+    iw) echo "Hebrew" ;;
+    ja) echo "Japanese" ;;
+    ka) echo "Georgian" ;;
+    kk) echo "Kazakh" ;;
+    kl) echo "Kalaallisut" ;;
+    ko) echo "Korean" ;;
+    ku) echo "Kurdish" ;;
+    kw) echo "Cornish" ;;
+    lg) echo "Ganda" ;;
+    lt) echo "Lithuanian" ;;
+    lv) echo "Latvian" ;;
+    mg) echo "Malagasy" ;;
+    mi) echo "Maori" ;;
+    mk) echo "Macedonian" ;;
+    ms) echo "Malay" ;;
+    mt) echo "Maltese" ;;
+    nb) echo "Norwegian Bokmål" ;;
+    nl) echo "Dutch" ;;
+    nn) echo "Norwegian Nynorsk" ;;
+    oc) echo "Occitan" ;;
+    om) echo "Oromo" ;;
+    pl) echo "Polish" ;;
+    pt) echo "Portugese" ;;
+    ro) echo "Romanian" ;;
+    ru) echo "Russian" ;;
+    sk) echo "Slovak" ;;
+    sl) echo "Slovenian" ;;
+    so) echo "Somali" ;;
+    sq) echo "Albanian" ;;
+    st) echo "Southern Sotho" ;;
+    sv) echo "Swedish" ;;
+    tcy) echo "Tulu" ;;
+    tg) echo "Tajik" ;;
+    th) echo "Thai" ;;
+    tl) echo "Tagalog" ;;
+    tr) echo "Turkish" ;;
+    uk) echo "Ukrainian" ;;
+    uz) echo "Uzbek" ;;
+    wa) echo "Walloon" ;;
+    xh) echo "Xhosa" ;;
+    yi) echo "Yiddish" ;;
+    zh) echo "Chinese" ;;
+    zu) echo "Zulu" ;;
+    *) echo "$1" ;;
+    esac
+}
+
+# ISO-3166 country codes for locales
+iso3166_country() {
+    case "$1" in
+    AD) echo "Andorra" ;;
+    AE) echo "United Arab Emirates" ;;
+    AL) echo "Albania" ;;
+    AR) echo "Argentina" ;;
+    AT) echo "Austria" ;;
+    AU) echo "Australia" ;;
+    BA) echo "Bonsia and Herzegovina" ;;
+    BE) echo "Belgium" ;;
+    BG) echo "Bulgaria" ;;
+    BH) echo "Bahrain" ;;
+    BO) echo "Bolivia" ;;
+    BR) echo "Brazil" ;;
+    BW) echo "Botswana" ;;
+    BY) echo "Belarus" ;;
+    CA) echo "Canada" ;;
+    CH) echo "Switzerland" ;;
+    CL) echo "Chile" ;;
+    CN) echo "China" ;;
+    CO) echo "Colombia" ;;
+    CR) echo "Costa Rica" ;;
+    CY) echo "Cyprus" ;;
+    CZ) echo "Czech Republic" ;;
+    DE) echo "Germany" ;;
+    DJ) echo "Djibouti" ;;
+    DK) echo "Denmark" ;;
+    DO) echo "Dominican Republic" ;;
+    DZ) echo "Algeria" ;;
+    EC) echo "Ecuador" ;;
+    EE) echo "Estonia" ;;
+    EG) echo "Egypt" ;;
+    ES) echo "Spain" ;;
+    FI) echo "Finland" ;;
+    FO) echo "Faroe Islands" ;;
+    FR) echo "France" ;;
+    GB) echo "Great Britain" ;;
+    GE) echo "Georgia" ;;
+    GL) echo "Greenland" ;;
+    GR) echo "Greece" ;;
+    GT) echo "Guatemala" ;;
+    HK) echo "Hong Kong" ;;
+    HN) echo "Honduras" ;;
+    HR) echo "Croatia" ;;
+    HU) echo "Hungary" ;;
+    ID) echo "Indonesia" ;;
+    IE) echo "Ireland" ;;
+    IL) echo "Israel" ;;
+    IN) echo "India" ;;
+    IQ) echo "Iraq" ;;
+    IS) echo "Iceland" ;;
+    IT) echo "Italy" ;;
+    JO) echo "Jordan" ;;
+    JP) echo "Japan" ;;
+    KE) echo "Kenya" ;;
+    KR) echo "Korea, Republic of" ;;
+    KW) echo "Kuwait" ;;
+    KZ) echo "Kazakhstan" ;;
+    LB) echo "Lebanon" ;;
+    LT) echo "Lithuania" ;;
+    LU) echo "Luxembourg" ;;
+    LV) echo "Latvia" ;;
+    LY) echo "Libya" ;;
+    MA) echo "Morocco" ;;
+    MG) echo "Madagascar" ;;
+    MK) echo "Macedonia" ;;
+    MT) echo "Malta" ;;
+    MX) echo "Mexico" ;;
+    MY) echo "Malaysia" ;;
+    NI) echo "Nicaragua" ;;
+    NL) echo "Netherlands" ;;
+    NO) echo "Norway" ;;
+    NZ) echo "New Zealand" ;;
+    OM) echo "Oman" ;;
+    PA) echo "Panama" ;;
+    PE) echo "Peru" ;;
+    PH) echo "Philippines" ;;
+    PL) echo "Poland" ;;
+    PR) echo "Puerto Rico" ;;
+    PT) echo "Portugal" ;;
+    PY) echo "Paraguay" ;;
+    QA) echo "Qatar" ;;
+    RO) echo "Romania" ;;
+    RU) echo "Russian Federation" ;;
+    SA) echo "Saudi Arabia" ;;
+    SD) echo "Sudan" ;;
+    SE) echo "Sweden" ;;
+    SG) echo "Singapore" ;;
+    SI) echo "Slovenia" ;;
+    SK) echo "Slovakia" ;;
+    SO) echo "Somalia" ;;
+    SV) echo "El Salvador" ;;
+    SY) echo "Syria" ;;
+    TH) echo "Thailand" ;;
+    TJ) echo "Tajikistan" ;;
+    TN) echo "Tunisia" ;;
+    TR) echo "Turkey" ;;
+    TW) echo "Taiwan" ;;
+    UA) echo "Ukraine" ;;
+    UG) echo "Uganda" ;;
+    US) echo "United States of America" ;;
+    UY) echo "Uruguay" ;;
+    UZ) echo "Uzbekistan" ;;
+    VE) echo "Venezuela" ;;
+    YE) echo "Yemen" ;;
+    ZA) echo "South Africa" ;;
+    ZW) echo "Zimbabwe" ;;
+    *) echo "$1" ;;
+    esac
+}
+
+show_disks() {
+    local dev size sectorsize gbytes
+
+    # IDE
+    for dev in $(ls /sys/block | grep -E '^hd'); do
+        if [ "$(cat /sys/block/$dev/device/media)" = "disk" ]; then
+            # Find out nr sectors and bytes per sector;
+            echo "/dev/$dev"
+            size=$(cat /sys/block/$dev/size)
+            sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size)
+            gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
+            echo "size:${gbytes}GB;sector_size:$sectorsize"
+        fi
+    done
+    # SATA/SCSI and Virtual disks (virtio)
+    for dev in $(ls /sys/block | grep -E '^([sv]|xv)d|mmcblk|nvme'); do
+        echo "/dev/$dev"
+        size=$(cat /sys/block/$dev/size)
+        sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size)
+        gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
+        echo "size:${gbytes}GB;sector_size:$sectorsize"
+    done
+    # cciss(4) devices
+    for dev in $(ls /dev/cciss 2>/dev/null | grep -E 'c[0-9]d[0-9]$'); do
+        echo "/dev/cciss/$dev"
+        size=$(cat /sys/block/cciss\!$dev/size)
+        sectorsize=$(cat /sys/block/cciss\!$dev/queue/hw_sector_size)
+        gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
+        echo "size:${gbytes}GB;sector_size:$sectorsize"
+    done
+}
+
+get_partfs() {
+    # Get fs type from configuration if available. This ensures
+    # that the user is shown the proper fs type if they install the system.
+    local part="$1"
+    local default="${2:-none}"
+    local fstype=$(grep "MOUNTPOINT ${part}" "$CONF_FILE" | awk '{print $3}')
+    echo "${fstype:-$default}"
+}
+
+show_partitions() {
+    local dev fstype fssize p part
+
+    set -- $(show_disks)
+    while [ $# -ne 0 ]; do
+        disk=$(basename $1)
+        shift 2
+        # ATA/SCSI/SATA
+        for p in /sys/block/$disk/$disk*; do
+            if [ -d $p ]; then
+                part=$(basename $p)
+                fstype=$(lsblk -nfr /dev/$part | awk '{print $2}' | head -1)
+                [ "$fstype" = "iso9660" ] && continue
+                [ "$fstype" = "crypto_LUKS" ] && continue
+                [ "$fstype" = "LVM2_member" ] && continue
+                fssize=$(lsblk -nr /dev/$part | awk '{print $4}' | head -1)
+                echo "/dev/$part"
+                echo "size:${fssize:-unknown};fstype:$(get_partfs "/dev/$part")"
+            fi
+        done
+    done
+    # Device Mapper
+    for p in /dev/mapper/*; do
+        part=$(basename $p)
+        [ "${part}" = "live-rw" ] && continue
+        [ "${part}" = "live-base" ] && continue
+        [ "${part}" = "control" ] && continue
+
+        fstype=$(lsblk -nfr $p | awk '{print $2}' | head -1)
+        fssize=$(lsblk -nr $p | awk '{print $4}' | head -1)
+        echo "${p}"
+        echo "size:${fssize:-unknown};fstype:$(get_partfs "$p")"
+    done
+    # Software raid (md)
+    for p in $(ls -d /dev/md* 2>/dev/null | grep '[0-9]'); do
+        part=$(basename $p)
+        if cat /proc/mdstat | grep -qw $part; then
+            fstype=$(lsblk -nfr /dev/$part | awk '{print $2}')
+            [ "$fstype" = "crypto_LUKS" ] && continue
+            [ "$fstype" = "LVM2_member" ] && continue
+            fssize=$(lsblk -nr /dev/$part | awk '{print $4}')
+            echo "$p"
+            echo "size:${fssize:-unknown};fstype:$(get_partfs "$p")"
+        fi
+    done
+    # cciss(4) devices
+    for part in $(ls /dev/cciss 2>/dev/null | grep -E 'c[0-9]d[0-9]p[0-9]+'); do
+        fstype=$(lsblk -nfr /dev/cciss/$part | awk '{print $2}')
+        [ "$fstype" = "crypto_LUKS" ] && continue
+        [ "$fstype" = "LVM2_member" ] && continue
+        fssize=$(lsblk -nr /dev/cciss/$part | awk '{print $4}')
+        echo "/dev/cciss/$part"
+        echo "size:${fssize:-unknown};fstype:$(get_partfs "/dev/cciss/$part")"
+    done
+    if [ -e /sbin/lvs ]; then
+        # LVM
+        lvs --noheadings | while read lvname vgname perms size; do
+            echo "/dev/mapper/${vgname}-${lvname}"
+            echo "size:${size};fstype:$(get_partfs "/dev/mapper/${vgname}-${lvname}" lvm)"
+        done
+    fi
+}
+
+menu_filesystems() {
+    local dev fstype fssize mntpoint reformat
+
+    while true; do
+        DIALOG --ok-label "Change" --cancel-label "Done" \
+            --title " Select the partition to edit " --menu "$MENULABEL" \
+            ${MENUSIZE} $(show_partitions)
+        [ $? -ne 0 ] && return
+
+        dev=$(cat $ANSWER)
+        DIALOG --title " Select the filesystem type for $dev " \
+            --menu "$MENULABEL" ${MENUSIZE} \
+            "btrfs" "Oracle's Btrfs" \
+            "ext2" "Linux ext2 (no journaling)" \
+            "ext3" "Linux ext3 (journal)" \
+            "ext4" "Linux ext4 (journal)" \
+            "f2fs" "Flash-Friendly Filesystem" \
+            "swap" "Linux swap" \
+            "vfat" "FAT32" \
+            "xfs" "SGI's XFS"
+        if [ $? -eq 0 ]; then
+            fstype=$(cat $ANSWER)
+        else
+            continue
+        fi
+        if [ "$fstype" != "swap" ]; then
+            DIALOG --inputbox "Please specify the mount point for $dev:" ${INPUTSIZE}
+            if [ $? -eq 0 ]; then
+                mntpoint=$(cat $ANSWER)
+            elif [ $? -eq 1 ]; then
+                continue
+            fi
+        else
+            mntpoint=swap
+        fi
+        DIALOG --yesno "Do you want to create a new filesystem on $dev?" ${YESNOSIZE}
+        if [ $? -eq 0 ]; then
+            reformat=1
+        elif [ $? -eq 1 ]; then
+            reformat=0
+        else
+            continue
+        fi
+        fssize=$(lsblk -nr $dev | awk '{print $4}')
+        set -- "$fstype" "$fssize" "$mntpoint" "$reformat"
+        if [ -n "$1" -a -n "$2" -a -n "$3" -a -n "$4" ]; then
+            local bdev=$(basename $dev)
+            local ddev=$(basename $(dirname $dev))
+            if [ "$ddev" != "dev" ]; then
+                sed -i -e "/^MOUNTPOINT \/dev\/${ddev}\/${bdev}.*/d" $CONF_FILE
+            else
+                sed -i -e "/^MOUNTPOINT \/dev\/${bdev}.*/d" $CONF_FILE
+            fi
+            echo "MOUNTPOINT $dev $1 $2 $3 $4" >>$CONF_FILE
+        fi
+    done
+    FILESYSTEMS_DONE=1
+}
+
+menu_partitions() {
+    DIALOG --title " Select the disk to partition " \
+        --menu "$MENULABEL" ${MENUSIZE} $(show_disks)
+    if [ $? -eq 0 ]; then
+        local device=$(cat $ANSWER)
+
+        DIALOG --title " Select the software for partitioning " \
+            --menu "$MENULABEL" ${MENUSIZE} \
+            "cfdisk" "Easy to use" \
+            "fdisk" "More advanced"
+        if [ $? -eq 0 ]; then
+            local software=$(cat $ANSWER)
+
+            DIALOG --title "Modify Partition Table on $device" --msgbox "\n
+${BOLD}${software} will be executed in disk $device.${RESET}\n\n
+For BIOS systems, MBR or GPT partition tables are supported.\n
+To use GPT on PC BIOS systems an empty partition of 1MB must be added\n
+at the first 2GB of the disk with the TOGGLE \`bios_grub' enabled.\n
+${BOLD}NOTE: you don't need this on EFI systems.${RESET}\n\n
+For EFI systems GPT is mandatory and a FAT32 partition with at least\n
+100MB must be created with the TOGGLE \`boot', this will be used as\n
+EFI System Partition. This partition must have mountpoint as \`/boot/efi'.\n\n
+At least 1 partition is required for the rootfs (/).\n
+For swap, RAM*2 must be really enough. For / 600MB are required.\n\n
+${BOLD}WARNING: /usr is not supported as a separate partition.${RESET}\n
+${RESET}\n" 18 80
+            if [ $? -eq 0 ]; then
+                while true; do
+                    clear
+                    $software $device
+                    PARTITIONS_DONE=1
+                    break
+                done
+            else
+                return
+            fi
+        fi
+    fi
+}
+
+menu_keymap() {
+    local _keymaps="$(find /usr/share/kbd/keymaps/ -type f -iname "*.map.gz" -printf "%f\n" | sed 's|.map.gz||g' | sort)"
+    local _KEYMAPS=
+
+    for f in ${_keymaps}; do
+        _KEYMAPS="${_KEYMAPS} ${f} -"
+    done
+    while true; do
+        DIALOG --title " Select your keymap " --menu "$MENULABEL" 14 70 14 ${_KEYMAPS}
+        if [ $? -eq 0 ]; then
+            set_option KEYMAP "$(cat $ANSWER)"
+            loadkeys "$(cat $ANSWER)"
+            KEYBOARD_DONE=1
+            break
+        else
+            return
+        fi
+    done
+}
+
+set_keymap() {
+    local KEYMAP=$(get_option KEYMAP)
+
+    if [ -f /etc/vconsole.conf ]; then
+        sed -i -e "s|KEYMAP=.*|KEYMAP=$KEYMAP|g" $TARGETDIR/etc/vconsole.conf
+    else
+        sed -i -e "s|#\?KEYMAP=.*|KEYMAP=$KEYMAP|g" $TARGETDIR/etc/rc.conf
+    fi
+}
+
+menu_locale() {
+    local _locales="$(grep -E '\.UTF-8' /etc/default/libc-locales | awk '{print $1}' | sed -e 's/^#//')"
+    local LOCALES ISO639 ISO3166
+    local TMPFILE=$(mktemp -t vinstall-XXXXXXXX || exit 1)
+    INFOBOX "Scanning locales ..." 4 60
+    for f in ${_locales}; do
+        eval $(echo $f | awk 'BEGIN { FS="." } \
+            { FS="_"; split($1, a); printf "ISO639=%s ISO3166=%s\n", a[1], a[2] }')
+        echo "$f|$(iso639_language $ISO639) ($(iso3166_country $ISO3166))|" >>$TMPFILE
+    done
+    clear
+    # Sort by ISO-639 language names
+    LOCALES=$(sort -t '|' -k 2 <$TMPFILE | xargs | sed -e's/| /|/g')
+    rm -f $TMPFILE
+    while true; do
+        (
+            IFS="|"
+            DIALOG --title " Select your locale " --menu "$MENULABEL" 18 70 18 ${LOCALES}
+        )
+        if [ $? -eq 0 ]; then
+            set_option LOCALE "$(cat $ANSWER)"
+            LOCALE_DONE=1
+            break
+        else
+            return
+        fi
+    done
+}
+
+set_locale() {
+    if [ -f $TARGETDIR/etc/default/libc-locales ]; then
+        local LOCALE="$(get_option LOCALE)"
+        : "${LOCALE:=C.UTF-8}"
+        sed -i -e "s|LANG=.*|LANG=$LOCALE|g" $TARGETDIR/etc/locale.conf
+        # Uncomment locale from /etc/default/libc-locales and regenerate it.
+        sed -e "/${LOCALE}/s/^\#//" -i $TARGETDIR/etc/default/libc-locales
+        echo "Running xbps-reconfigure -f glibc-locales ..." >$LOG
+        chroot $TARGETDIR xbps-reconfigure -f glibc-locales >$LOG 2>&1
+    fi
+}
+
+menu_timezone() {
+    local areas=(Africa America Antarctica Arctic Asia Atlantic Australia Europe Indian Pacific)
+
+    local area locations location
+    while (
+        IFS='|'
+        DIALOG ${area:+--default-item|"$area"} --title " Select area " --menu "$MENULABEL" 19 51 19 $(printf '%s||' "${areas[@]}")
+    ); do
+        area=$(cat $ANSWER)
+        read -a locations -d '\n' < <(find /usr/share/zoneinfo/$area -type f -printf '%P\n' | sort)
+        if (
+            IFS='|'
+            DIALOG --title " Select location (${area}) " --menu "$MENULABEL" 19 51 19 $(printf '%s||' "${locations[@]//_/ }")
+        ); then
+            location=$(tr ' ' '_' <$ANSWER)
+            set_option TIMEZONE "$area/$location"
+            TIMEZONE_DONE=1
+            return 0
+        else
+            continue
+        fi
+    done
+    return 1
+}
+
+set_timezone() {
+    local TIMEZONE="$(get_option TIMEZONE)"
+
+    ln -sf "/usr/share/zoneinfo/${TIMEZONE}" "${TARGETDIR}/etc/localtime"
+}
+
+menu_hostname() {
+    while true; do
+        DIALOG --inputbox "Set the machine hostname:" ${INPUTSIZE}
+        if [ $? -eq 0 ]; then
+            set_option HOSTNAME "$(cat $ANSWER)"
+            HOSTNAME_DONE=1
+            break
+        else
+            return
+        fi
+    done
+}
+
+set_hostname() {
+    local hostname="$(get_option HOSTNAME)"
+    echo "${hostname:-void}" >$TARGETDIR/etc/hostname
+}
+
+menu_rootpassword() {
+    local _firstpass _secondpass _again _desc
+
+    while true; do
+        if [ -z "${_firstpass}" ]; then
+            _desc="Enter the root password"
+        else
+            _again=" again"
+        fi
+        DIALOG --insecure --passwordbox "${_desc}${_again}" ${INPUTSIZE}
+        if [ $? -eq 0 ]; then
+            if [ -z "${_firstpass}" ]; then
+                _firstpass="$(cat $ANSWER)"
+            else
+                _secondpass="$(cat $ANSWER)"
+            fi
+            if [ -n "${_firstpass}" -a -n "${_secondpass}" ]; then
+                if [ "${_firstpass}" != "${_secondpass}" ]; then
+                    INFOBOX "Passwords do not match! Please enter again." 6 60
+                    unset _firstpass _secondpass _again
+                    sleep 2 && clear && continue
+                fi
+                set_option ROOTPASSWORD "${_firstpass}"
+                ROOTPASSWORD_DONE=1
+                break
+            fi
+        else
+            return
+        fi
+    done
+}
+
+set_rootpassword() {
+    echo "root:$(get_option ROOTPASSWORD)" | chroot $TARGETDIR chpasswd -c SHA512
+}
+
+menu_useraccount() {
+    local _firstpass _secondpass _desc _again
+    local _groups _status _group _checklist
+    local _preset _userlogin
+
+    while true; do
+        _preset=$(get_option USERLOGIN)
+        [ -z "$_preset" ] && _preset="void"
+        DIALOG --inputbox "Enter a primary login name:" ${INPUTSIZE} "$_preset"
+        if [ $? -eq 0 ]; then
+            _userlogin="$(cat $ANSWER)"
+            # based on useradd(8) § Caveats
+            if [ "${#_userlogin}" -le 32 ] && [[ "${_userlogin}" =~ ^[a-z_][a-z0-9_-]*[$]?$ ]]; then
+                set_option USERLOGIN "${_userlogin}"
+                USERLOGIN_DONE=1
+                break
+            else
+                INFOBOX "Invalid login name! Please try again." 6 60
+                unset _userlogin
+                sleep 2 && clear && continue
+            fi
+        else
+            return
+        fi
+    done
+
+    while true; do
+        _preset=$(get_option USERNAME)
+        [ -z "$_preset" ] && _preset="Void User"
+        DIALOG --inputbox "Enter a display name for login '$(get_option USERLOGIN)' :" \
+            ${INPUTSIZE} "$_preset"
+        if [ $? -eq 0 ]; then
+            set_option USERNAME "$(cat $ANSWER)"
+            USERNAME_DONE=1
+            break
+        else
+            return
+        fi
+    done
+
+    while true; do
+        if [ -z "${_firstpass}" ]; then
+            _desc="Enter the password for login '$(get_option USERLOGIN)'"
+        else
+            _again=" again"
+        fi
+        DIALOG --insecure --passwordbox "${_desc}${_again}" ${INPUTSIZE}
+        if [ $? -eq 0 ]; then
+            if [ -z "${_firstpass}" ]; then
+                _firstpass="$(cat $ANSWER)"
+            else
+                _secondpass="$(cat $ANSWER)"
+            fi
+            if [ -n "${_firstpass}" -a -n "${_secondpass}" ]; then
+                if [ "${_firstpass}" != "${_secondpass}" ]; then
+                    INFOBOX "Passwords do not match! Please enter again." 6 60
+                    unset _firstpass _secondpass _again
+                    sleep 2 && clear && continue
+                fi
+                set_option USERPASSWORD "${_firstpass}"
+                USERPASSWORD_DONE=1
+                break
+            fi
+        else
+            return
+        fi
+    done
+
+    _groups="wheel,audio,video,floppy,cdrom,optical,kvm,xbuilder"
+    while true; do
+        _desc="Select group membership for login '$(get_option USERLOGIN)':"
+        for _group in $(cat /etc/group); do
+            _gid="$(echo ${_group} | cut -d: -f3)"
+            _group="$(echo ${_group} | cut -d: -f1)"
+            _status="$(echo ${_groups} | grep -w ${_group})"
+            if [ -z "${_status}" ]; then
+                _status=off
+            else
+                _status=on
+            fi
+            # ignore the groups of root, existing users, and package groups
+            if [[ "${_gid}" -ge 1000 || "${_group}" = "_"* || "${_group}" = "root" ]]; then
+                continue
+            fi
+            if [ -z "${_checklist}" ]; then
+                _checklist="${_group} ${_group}:${_gid} ${_status}"
+            else
+                _checklist="${_checklist} ${_group} ${_group}:${_gid} ${_status}"
+            fi
+        done
+        DIALOG --no-tags --checklist "${_desc}" 20 60 18 ${_checklist}
+        if [ $? -eq 0 ]; then
+            set_option USERGROUPS $(cat $ANSWER | sed -e's| |,|g')
+            USERGROUPS_DONE=1
+            break
+        else
+            return
+        fi
+    done
+}
+
+set_useraccount() {
+    [ -z "$USERACCOUNT_DONE" ] && return
+    chroot $TARGETDIR useradd -m -G "$(get_option USERGROUPS)" \
+        -c "$(get_option USERNAME)" "$(get_option USERLOGIN)"
+    echo "$(get_option USERLOGIN):$(get_option USERPASSWORD)" |
+        chroot $TARGETDIR chpasswd -c SHA512
+}
+
+menu_bootloader() {
+    while true; do
+        DIALOG --title " Select the disk to install the bootloader" \
+            --menu "$MENULABEL" ${MENUSIZE} $(show_disks) none "Manage bootloader otherwise"
+        if [ $? -eq 0 ]; then
+            set_option BOOTLOADER "$(cat $ANSWER)"
+            BOOTLOADER_DONE=1
+            break
+        else
+            return
+        fi
+    done
+    while true; do
+        DIALOG --yesno "Use a graphical terminal for the boot loader?" ${YESNOSIZE}
+        if [ $? -eq 0 ]; then
+            set_option TEXTCONSOLE 0
+            break
+        elif [ $? -eq 1 ]; then
+            set_option TEXTCONSOLE 1
+            break
+        else
+            return
+        fi
+    done
+}
+
+set_bootloader() {
+    local dev=$(get_option BOOTLOADER) grub_args=
+
+    if [ "$dev" = "none" ]; then return; fi
+
+    # Check if it's an EFI system via efivars module.
+    if [ -n "$EFI_SYSTEM" ]; then
+        grub_args="--target=$EFI_TARGET --efi-directory=/boot/efi --bootloader-id=void_grub --recheck"
+    fi
+    echo "Running grub-install $grub_args $dev..." >$LOG
+    chroot $TARGETDIR grub-install $grub_args $dev >$LOG 2>&1
+    if [ $? -ne 0 ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+failed to install GRUB to $dev!\nCheck $LOG for errors." ${MSGBOXSIZE}
+        DIE 1
+    fi
+    echo "Running grub-mkconfig on $TARGETDIR..." >$LOG
+    chroot $TARGETDIR grub-mkconfig -o /boot/grub/grub.cfg >$LOG 2>&1
+    if [ $? -ne 0 ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR${RESET}: \
+failed to run grub-mkconfig!\nCheck $LOG for errors." ${MSGBOXSIZE}
+        DIE 1
+    fi
+}
+
+test_network() {
+    # Reset the global variable to ensure that network is accessible for this test.
+    NETWORK_DONE=
+
+    rm -f otime &&
+        xbps-uhelper fetch https://repo-default.voidlinux.org/current/otime >$LOG 2>&1
+    local status=$?
+    rm -f otime
+
+    if [ "$status" -eq 0 ]; then
+        DIALOG --msgbox "Network is working properly!" ${MSGBOXSIZE}
+        NETWORK_DONE=1
+        return 1
+    fi
+    if [ "$1" = "nm" ]; then
+        DIALOG --msgbox "Network Manager is enabled but network is inaccessible, please set it up externally with nmcli, nmtui, or the Network Manager tray applet." ${MSGBOXSIZE}
+    else
+        DIALOG --msgbox "Network is inaccessible, please set it up properly." ${MSGBOXSIZE}
+    fi
+}
+
+configure_wifi() {
+    local dev="$1" ssid enc pass _wpasupconf=/etc/wpa_supplicant/wpa_supplicant.conf
+
+    DIALOG --form "Wireless configuration for ${dev}\n(encryption type: wep or wpa)" 0 0 0 \
+        "SSID:" 1 1 "" 1 16 30 0 \
+        "Encryption:" 2 1 "" 2 16 4 3 \
+        "Password:" 3 1 "" 3 16 63 0 || return 1
+    readarray -t values <<<$(cat $ANSWER)
+    ssid="${values[0]}"
+    enc="${values[1]}"
+    pass="${values[2]}"
+
+    if [ -z "$ssid" ]; then
+        DIALOG --msgbox "Invalid SSID." ${MSGBOXSIZE}
+        return 1
+    elif [ -z "$enc" -o "$enc" != "wep" -a "$enc" != "wpa" ]; then
+        DIALOG --msgbox "Invalid encryption type (possible values: wep or wpa)." ${MSGBOXSIZE}
+        return 1
+    elif [ -z "$pass" ]; then
+        DIALOG --msgbox "Invalid AP password." ${MSGBOXSIZE}
+    fi
+
+    # reset the configuration to the default, if necessary
+    # otherwise backup the configuration
+    if [ -f ${_wpasupconf}.orig ]; then
+        cp -f ${_wpasupconf}.orig ${_wpasupconf}
+    else
+        cp -f ${_wpasupconf} ${_wpasupconf}.orig
+    fi
+    if [ "$enc" = "wep" ]; then
+        cat <<EOF >>${_wpasupconf}
+network={
+  ssid="$ssid"
+  wep_key0="$pass"
+  wep_tx_keyidx=0
+  auth_alg=SHARED
+}
+EOF
+    else
+        wpa_passphrase "$ssid" "$pass" >>${_wpasupconf}
+    fi
+
+    sv restart wpa_supplicant
+    configure_net_dhcp $dev
+    return $?
+}
+
+configure_net() {
+    local dev="$1" rval
+
+    DIALOG --yesno "Do you want to use DHCP for $dev?" ${YESNOSIZE}
+    rval=$?
+    if [ $rval -eq 0 ]; then
+        configure_net_dhcp $dev
+    elif [ $rval -eq 1 ]; then
+        configure_net_static $dev
+    fi
+}
+
+iface_setup() {
+    ip addr show dev $1 | grep -q -e 'inet ' -e 'inet6 '
+    return $?
+}
+
+configure_net_dhcp() {
+    local dev="$1"
+
+    iface_setup $dev
+    if [ $? -eq 1 ]; then
+        sv restart dhcpcd 2>&1 | tee $LOG |
+            DIALOG --progressbox "Initializing $dev via DHCP..." ${WIDGET_SIZE}
+        if [ $? -ne 0 ]; then
+            DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} failed to run dhcpcd. See $LOG for details." ${MSGBOXSIZE}
+            return 1
+        fi
+        export -f iface_setup
+        timeout 10s bash -c "while true; do iface_setup $dev; sleep 0.25; done"
+        if [ $? -eq 1 ]; then
+            DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} DHCP request failed for $dev. Check $LOG for errors." ${MSGBOXSIZE}
+            return 1
+        fi
+    fi
+    test_network
+    if [ $? -eq 1 ]; then
+        set_option NETWORK "${dev} dhcp"
+    fi
+}
+
+configure_net_static() {
+    local ip gw dns1 dns2 dev=$1
+
+    DIALOG --form "Static IP configuration for $dev:" 0 0 0 \
+        "IP address:" 1 1 "192.168.0.2" 1 21 20 0 \
+        "Gateway:" 2 1 "192.168.0.1" 2 21 20 0 \
+        "DNS Primary" 3 1 "8.8.8.8" 3 21 20 0 \
+        "DNS Secondary" 4 1 "8.8.4.4" 4 21 20 0 || return 1
+
+    set -- $(cat $ANSWER)
+    ip=$1
+    gw=$2
+    dns1=$3
+    dns2=$4
+    echo "running: ip link set dev $dev up" >$LOG
+    ip link set dev $dev up >$LOG 2>&1
+    if [ $? -ne 0 ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} Failed to bring $dev interface." ${MSGBOXSIZE}
+        return 1
+    fi
+    echo "running: ip addr add $ip dev $dev" >$LOG
+    ip addr add $ip dev $dev >$LOG 2>&1
+    if [ $? -ne 0 ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} Failed to set ip to the $dev interface." ${MSGBOXSIZE}
+        return 1
+    fi
+    ip route add default via $gw >$LOG 2>&1
+    if [ $? -ne 0 ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} failed to setup your gateway." ${MSGBOXSIZE}
+        return 1
+    fi
+    echo "nameserver $dns1" >/etc/resolv.conf
+    echo "nameserver $dns2" >>/etc/resolv.conf
+    test_network
+    if [ $? -eq 1 ]; then
+        set_option NETWORK "${dev} static $ip $gw $dns1 $dns2"
+    fi
+}
+
+menu_network() {
+    local dev addr f DEVICES
+
+    if [ -e /var/service/NetworkManager ]; then
+        test_network nm
+        return
+    fi
+
+    for f in $(ls /sys/class/net); do
+        [ "$f" = "lo" ] && continue
+        addr=$(cat /sys/class/net/$f/address)
+        DEVICES="$DEVICES $f $addr"
+    done
+    DIALOG --title " Select the network interface to configure " \
+        --menu "$MENULABEL" ${MENUSIZE} ${DEVICES}
+    if [ $? -eq 0 ]; then
+        dev=$(cat $ANSWER)
+        if $(echo $dev | egrep -q "^wl.*" 2>/dev/null); then
+            configure_wifi $dev
+        else
+            configure_net $dev
+        fi
+    fi
+}
+
+validate_useraccount() {
+    # don't check that USERNAME has been set because it can be empty
+    local USERLOGIN=$(get_option USERLOGIN)
+    local USERPASSWORD=$(get_option USERPASSWORD)
+    local USERGROUPS=$(get_option USERGROUPS)
+
+    if [ -n "$USERLOGIN" ] && [ -n "$USERPASSWORD" ] && [ -n "$USERGROUPS" ]; then
+        USERACCOUNT_DONE=1
+    fi
+}
+
+validate_filesystems() {
+    local mnts dev size fstype mntpt mkfs rootfound fmt
+    local usrfound efi_system_partition
+    local bootdev=$(get_option BOOTLOADER)
+
+    unset TARGETFS
+    mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE)
+    set -- ${mnts}
+    while [ $# -ne 0 ]; do
+        fmt=""
+        dev=$2
+        fstype=$3
+        size=$4
+        mntpt="$5"
+        mkfs=$6
+        shift 6
+
+        if [ "$mntpt" = "/" ]; then
+            rootfound=1
+        elif [ "$mntpt" = "/usr" ]; then
+            usrfound=1
+        elif [ "$fstype" = "vfat" -a "$mntpt" = "/boot/efi" ]; then
+            efi_system_partition=1
+        fi
+        if [ "$mkfs" -eq 1 ]; then
+            fmt="NEW FILESYSTEM: "
+        fi
+        if [ -z "$TARGETFS" ]; then
+            TARGETFS="${fmt}$dev ($size) mounted on $mntpt as ${fstype}\n"
+        else
+            TARGETFS="${TARGETFS}${fmt}${dev} ($size) mounted on $mntpt as ${fstype}\n"
+        fi
+    done
+    if [ -z "$rootfound" ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+the mount point for the root filesystem (/) has not yet been configured." ${MSGBOXSIZE}
+        return 1
+    elif [ -n "$usrfound" ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+/usr mount point has been configured but is not supported, please remove it to continue." ${MSGBOXSIZE}
+        return 1
+    elif [ -n "$EFI_SYSTEM" -a "$bootdev" != "none" -a -z "$efi_system_partition" ]; then
+        DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+The EFI System Partition has not yet been configured, please create it\n
+as FAT32, mountpoint /boot/efi and at least with 100MB of size." ${MSGBOXSIZE}
+        return 1
+    fi
+    FILESYSTEMS_DONE=1
+}
+
+create_filesystems() {
+    local mnts dev mntpt fstype fspassno mkfs size rv uuid
+
+    mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE | sort -k 5)
+    set -- ${mnts}
+    while [ $# -ne 0 ]; do
+        dev=$2
+        fstype=$3
+        mntpt="$5"
+        mkfs=$6
+        shift 6
+
+        # swap partitions
+        if [ "$fstype" = "swap" ]; then
+            swapoff $dev >/dev/null 2>&1
+            if [ "$mkfs" -eq 1 ]; then
+                mkswap $dev >$LOG 2>&1
+                if [ $? -ne 0 ]; then
+                    DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+failed to create swap on ${dev}!\ncheck $LOG for errors." ${MSGBOXSIZE}
+                    DIE 1
+                fi
+            fi
+            swapon $dev >$LOG 2>&1
+            if [ $? -ne 0 ]; then
+                DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+failed to activate swap on $dev!\ncheck $LOG for errors." ${MSGBOXSIZE}
+                DIE 1
+            fi
+            # Add entry for target fstab
+            uuid=$(blkid -o value -s UUID "$dev")
+            echo "UUID=$uuid none swap defaults 0 0" >>$TARGET_FSTAB
+            continue
+        fi
+
+        if [ "$mkfs" -eq 1 ]; then
+            case "$fstype" in
+            btrfs)
+                MKFS="mkfs.btrfs -f"
+                modprobe btrfs >$LOG 2>&1
+                ;;
+            ext2)
+                MKFS="mke2fs -F"
+                modprobe ext2 >$LOG 2>&1
+                ;;
+            ext3)
+                MKFS="mke2fs -F -j"
+                modprobe ext3 >$LOG 2>&1
+                ;;
+            ext4)
+                MKFS="mke2fs -F -t ext4"
+                modprobe ext4 >$LOG 2>&1
+                ;;
+            f2fs)
+                MKFS="mkfs.f2fs -f"
+                modprobe f2fs >$LOG 2>&1
+                ;;
+            vfat)
+                MKFS="mkfs.vfat -F32"
+                modprobe vfat >$LOG 2>&1
+                ;;
+            xfs)
+                MKFS="mkfs.xfs -f -i sparse=0"
+                modprobe xfs >$LOG 2>&1
+                ;;
+            esac
+            TITLE="Check $LOG for details ..."
+            INFOBOX "Creating filesystem $fstype on $dev for $mntpt ..." 8 60
+            echo "Running $MKFS $dev..." >$LOG
+            $MKFS $dev >$LOG 2>&1
+            rv=$?
+            if [ $rv -ne 0 ]; then
+                DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+failed to create filesystem $fstype on $dev!\ncheck $LOG for errors." ${MSGBOXSIZE}
+                DIE 1
+            fi
+        fi
+        # Mount rootfs the first one.
+        [ "$mntpt" != "/" ] && continue
+        mkdir -p $TARGETDIR
+        echo "Mounting $dev on $mntpt ($fstype)..." >$LOG
+        mount -t $fstype $dev $TARGETDIR >$LOG 2>&1
+        if [ $? -ne 0 ]; then
+            DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+failed to mount $dev on ${mntpt}! check $LOG for errors." ${MSGBOXSIZE}
+            DIE 1
+        fi
+        # Add entry to target fstab
+        uuid=$(blkid -o value -s UUID "$dev")
+        if [ "$fstype" = "f2fs" -o "$fstype" = "btrfs" -o "$fstype" = "xfs" ]; then
+            fspassno=0
+        else
+            fspassno=1
+        fi
+        echo "UUID=$uuid $mntpt $fstype defaults 0 $fspassno" >>$TARGET_FSTAB
+    done
+
+    # mount all filesystems in target rootfs
+    mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE | sort -k 5)
+    set -- ${mnts}
+    while [ $# -ne 0 ]; do
+        dev=$2
+        fstype=$3
+        mntpt="$5"
+        shift 6
+        [ "$mntpt" = "/" -o "$fstype" = "swap" ] && continue
+        mkdir -p ${TARGETDIR}${mntpt}
+        echo "Mounting $dev on $mntpt ($fstype)..." >$LOG
+        mount -t $fstype $dev ${TARGETDIR}${mntpt} >$LOG 2>&1
+        if [ $? -ne 0 ]; then
+            DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \
+failed to mount $dev on $mntpt! check $LOG for errors." ${MSGBOXSIZE}
+            DIE
+        fi
+        # Add entry to target fstab
+        uuid=$(blkid -o value -s UUID "$dev")
+        if [ "$fstype" = "f2fs" -o "$fstype" = "btrfs" -o "$fstype" = "xfs" ]; then
+            fspassno=0
+        else
+            fspassno=2
+        fi
+        echo "UUID=$uuid $mntpt $fstype defaults 0 $fspassno" >>$TARGET_FSTAB
+    done
+}
+
+mount_filesystems() {
+    for f in sys proc dev; do
+        [ ! -d $TARGETDIR/$f ] && mkdir $TARGETDIR/$f
+        echo "Mounting $TARGETDIR/$f..." >$LOG
+        mount --rbind /$f $TARGETDIR/$f >$LOG 2>&1
+    done
+}
+
+umount_filesystems() {
+    local mnts="$(grep -E '^MOUNTPOINT.*swap.*$' $CONF_FILE | sort -r -k 5)"
+    set -- ${mnts}
+    while [ $# -ne 0 ]; do
+        local dev=$2
+        local fstype=$3
+        shift 6
+        if [ "$fstype" = "swap" ]; then
+            echo "Disabling swap space on $dev..." >$LOG
+            swapoff $dev >$LOG 2>&1
+            continue
+        fi
+    done
+    echo "Unmounting $TARGETDIR..." >$LOG
+    umount -R $TARGETDIR >$LOG 2>&1
+}
+
+log_and_count() {
+    local progress whole tenth
+    while read line; do
+        echo "$line" >$LOG
+        copy_count=$((copy_count + 1))
+        progress=$((1000 * copy_count / copy_total))
+        if [ "$progress" != "$copy_progress" ]; then
+            whole=$((progress / 10))
+            tenth=$((progress % 10))
+            printf "Progress: %d.%d%% (%d of %d files)\n" $whole $tenth $copy_count $copy_total
+            copy_progress=$progress
+        fi
+    done
+}
+
+copy_rootfs() {
+    local tar_in="--create --one-file-system --xattrs"
+    TITLE="Check $LOG for details ..."
+    INFOBOX "Counting files, please be patient ..." 4 60
+    copy_total=$(tar ${tar_in} -v -f /dev/null / 2>/dev/null | wc -l)
+    export copy_total copy_count=0 copy_progress=
+    clear
+    tar ${tar_in} -f - / 2>/dev/null |
+        tar --extract --xattrs --xattrs-include='*' --preserve-permissions -v -f - -C $TARGETDIR |
+        log_and_count |
+        DIALOG --title "${TITLE}" \
+            --progressbox "Copying live image to target rootfs." 5 60
+    if [ $? -ne 0 ]; then
+        DIE 1
+    fi
+    unset copy_total copy_count copy_percent
+}
+
+install_packages() {
+    local _grub= _syspkg=
+
+    if [ -n "$EFI_SYSTEM" ]; then
+        if [ $EFI_FW_BITS -eq 32 ]; then
+            _grub="grub-i386-efi"
+        else
+            _grub="grub-x86_64-efi"
+        fi
+    else
+        _grub="grub"
+    fi
+
+    _syspkg="base-system"
+
+    mkdir -p $TARGETDIR/var/db/xbps/keys $TARGETDIR/usr/share
+    cp -a /usr/share/xbps.d $TARGETDIR/usr/share/
+    cp /var/db/xbps/keys/*.plist $TARGETDIR/var/db/xbps/keys
+    if [ -n "$MIRROR_DONE" ]; then
+        mkdir -p $TARGETDIR/etc
+        cp -a /etc/xbps.d $TARGETDIR/etc
+    fi
+    mkdir -p $TARGETDIR/boot/grub
+
+    _arch=$(xbps-uhelper arch)
+
+    stdbuf -oL env XBPS_ARCH=${_arch} \
+        xbps-install -r $TARGETDIR -SyU ${_syspkg} ${_grub} 2>&1 |
+        DIALOG --title "Installing base system packages..." \
+            --programbox 24 80
+    if [ $? -ne 0 ]; then
+        DIE 1
+    fi
+    xbps-reconfigure -r $TARGETDIR -f base-files >/dev/null 2>&1
+    chroot $TARGETDIR xbps-reconfigure -a
+}
+
+enable_service() {
+    ln -sf /etc/sv/$1 $TARGETDIR/etc/runit/runsvdir/default/$1
+}
+
+menu_install() {
+    ROOTPASSWORD_DONE="$(get_option ROOTPASSWORD)"
+    BOOTLOADER_DONE="$(get_option BOOTLOADER)"
+
+    if [ -z "$ROOTPASSWORD_DONE" ]; then
+        DIALOG --msgbox "${BOLD}The root password has not been configured, \
+please do so before starting the installation.${RESET}" ${MSGBOXSIZE}
+        return 1
+    elif [ -z "$BOOTLOADER_DONE" ]; then
+        DIALOG --msgbox "${BOLD}The disk to install the bootloader has not been \
+configured, please do so before starting the installation.${RESET}" ${MSGBOXSIZE}
+        return 1
+    fi
+
+    # Validate filesystems after making sure bootloader is done,
+    # so that specific checks can be made based on the selection
+    validate_filesystems || return 1
+
+    if [ -z "$FILESYSTEMS_DONE" ]; then
+        DIALOG --msgbox "${BOLD}Required filesystems were not configured, \
+please do so before starting the installation.${RESET}" ${MSGBOXSIZE}
+        return 1
+    fi
+
+    # Validate useraccount. All parameters must be set (name, password, login name, groups).
+    validate_useraccount
+
+    if [ -z "$USERACCOUNT_DONE" ]; then
+        DIALOG --yesno "${BOLD}The user account is not set up properly.${RESET}\n\n
+${BOLD}${RED}WARNING: no user will be created. You will only be able to login \
+with the root user in your new system.${RESET}\n\n
+${BOLD}Do you want to continue?${RESET}" 10 60 || return
+    fi
+
+    DIALOG --yesno "${BOLD}The following operations will be executed:${RESET}\n\n
+${BOLD}${TARGETFS}${RESET}\n
+${BOLD}${RED}WARNING: data on partitions will be COMPLETELY DESTROYED for new \
+filesystems.${RESET}\n\n
+${BOLD}Do you want to continue?${RESET}" 20 80 || return
+    unset TARGETFS
+
+    # Create and mount filesystems
+    create_filesystems
+
+    SOURCE_DONE="$(get_option SOURCE)"
+    # If source not set use defaults.
+    if [ "$(get_option SOURCE)" = "local" -o -z "$SOURCE_DONE" ]; then
+        copy_rootfs
+        . /etc/default/live.conf
+        rm -f $TARGETDIR/etc/motd
+        rm -f $TARGETDIR/etc/issue
+        rm -f $TARGETDIR/usr/sbin/void-installer
+        # Remove modified sddm.conf to let sddm use the defaults.
+        rm -f $TARGETDIR/etc/sddm.conf
+        # Remove live user.
+        echo "Removing $USERNAME live user from targetdir ..." >$LOG
+        chroot $TARGETDIR userdel -r $USERNAME >$LOG 2>&1
+        rm -f $TARGETDIR/etc/sudoers.d/99-void-live
+        sed -i "s,GETTY_ARGS=\"--noclear -a $USERNAME\",GETTY_ARGS=\"--noclear\",g" $TARGETDIR/etc/sv/agetty-tty1/conf
+        TITLE="Check $LOG for details ..."
+        INFOBOX "Rebuilding initramfs for target ..." 4 60
+        echo "Rebuilding initramfs for target ..." >$LOG
+        # mount required fs
+        mount_filesystems
+        chroot $TARGETDIR dracut --no-hostonly --add-drivers "ahci" --force >>$LOG 2>&1
+        INFOBOX "Removing temporary packages from target ..." 4 60
+        echo "Removing temporary packages from target ..." >$LOG
+        TO_REMOVE="dialog xtools-minimal xmirror"
+        # only remove espeakup and brltty if it wasn't enabled in the live environment
+        if ! [ -e "/var/service/espeakup" ]; then
+            TO_REMOVE+=" espeakup"
+        fi
+        if ! [ -e "/var/service/brltty" ]; then
+            TO_REMOVE+=" brltty"
+        fi
+        xbps-remove -r $TARGETDIR -Ry $TO_REMOVE >>$LOG 2>&1
+        rmdir $TARGETDIR/mnt/target
+    else
+        # mount required fs
+        mount_filesystems
+        # network install, use packages.
+        install_packages
+    fi
+
+    INFOBOX "Applying installer settings..." 4 60
+
+    # copy target fstab.
+    install -Dm644 $TARGET_FSTAB $TARGETDIR/etc/fstab
+    # Mount /tmp as tmpfs.
+    echo "tmpfs /tmp tmpfs defaults,nosuid,nodev 0 0" >>$TARGETDIR/etc/fstab
+
+    # set up keymap, locale, timezone, hostname, root passwd and user account.
+    set_keymap
+    set_locale
+    set_timezone
+    set_hostname
+    set_rootpassword
+    set_useraccount
+
+    # Copy /etc/skel files for root.
+    cp $TARGETDIR/etc/skel/.[bix]* $TARGETDIR/root
+
+    NETWORK_DONE="$(get_option NETWORK)"
+    # network settings for target
+    if [ -n "$NETWORK_DONE" ]; then
+        local net="$(get_option NETWORK)"
+        set -- ${net}
+        local _dev="$1" _type="$2" _ip="$3" _gw="$4" _dns1="$5" _dns2="$6"
+        if [ -z "$_type" ]; then
+            # network type empty??!!!
+            :
+        elif [ "$_type" = "dhcp" ]; then
+            if $(echo $_dev | egrep -q "^wl.*" 2>/dev/null); then
+                cp /etc/wpa_supplicant/wpa_supplicant.conf $TARGETDIR/etc/wpa_supplicant
+                ln -sf /etc/sv/wpa_supplicant $TARGETDIR/etc/runit/runsvdir/default/wpa_supplicant
+            fi
+            enable_service dhcpcd
+        elif [ -n "$_dev" -a "$_type" = "static" ]; then
+            # static IP through dhcpcd.
+            mv $TARGETDIR/etc/dhcpcd.conf $TARGETDIR/etc/dhcpcd.conf.orig
+            echo "# Static IP configuration set by the void-installer for $_dev." \
+                >$TARGETDIR/etc/dhcpcd.conf
+            echo "interface $_dev" >>$TARGETDIR/etc/dhcpcd.conf
+            echo "static ip_address=$_ip" >>$TARGETDIR/etc/dhcpcd.conf
+            echo "static routers=$_gw" >>$TARGETDIR/etc/dhcpcd.conf
+            echo "static domain_name_servers=$_dns1 $_dns2" >>$TARGETDIR/etc/dhcpcd.conf
+            enable_service dhcpcd
+        fi
+    fi
+
+    if [ -d $TARGETDIR/etc/sudoers.d ]; then
+        USERLOGIN="$(get_option USERLOGIN)"
+        if [ -z "$(echo $(get_option USERGROUPS) | grep -w wheel)" -a -n "$USERLOGIN" ]; then
+            # enable sudo for primary user USERLOGIN who is not member of wheel
+            echo "# Enable sudo for login '$USERLOGIN'" >"$TARGETDIR/etc/sudoers.d/$USERLOGIN"
+            echo "$USERLOGIN ALL=(ALL:ALL) ALL" >>"$TARGETDIR/etc/sudoers.d/$USERLOGIN"
+        else
+            # enable the sudoers entry for members of group wheel
+            echo "%wheel ALL=(ALL:ALL) ALL" >"$TARGETDIR/etc/sudoers.d/wheel"
+        fi
+        unset USERLOGIN
+    fi
+
+    # clean up polkit rule - it's only useful in live systems
+    rm -f $TARGETDIR/etc/polkit-1/rules.d/void-live.rules
+
+    # enable text console for grub if chosen
+    if [ "$(get_option TEXTCONSOLE)" = "1" ]; then
+        sed -i $TARGETDIR/etc/default/grub \
+            -e 's|#\(GRUB_TERMINAL_INPUT\).*|\1=console|' \
+            -e 's|#\(GRUB_TERMINAL_OUTPUT\).*|\1=console|'
+    fi
+
+    # install bootloader.
+    set_bootloader
+    sync && sync && sync
+
+    # unmount all filesystems.
+    umount_filesystems
+
+    # installed successfully.
+    DIALOG --yesno "${BOLD}Void Linux has been installed successfully!${RESET}\n
+Do you want to reboot the system?" ${YESNOSIZE}
+    if [ $? -eq 0 ]; then
+        shutdown -r now
+    else
+        return
+    fi
+}
+
+menu_source() {
+    local src=
+
+    DIALOG --title " Select installation source " \
+        --menu "$MENULABEL" 8 70 0 \
+        "Local" "Packages from ISO image" \
+        "Network" "Base system only, downloaded from official repository"
+    case "$(cat $ANSWER)" in
+    "Local") src="local" ;;
+    "Network")
+        src="net"
+        if [ -z "$NETWORK_DONE" ]; then
+            if test_network; then
+                menu_network
+            fi
+        fi
+        ;;
+    *) return 1 ;;
+    esac
+    SOURCE_DONE=1
+    set_option SOURCE $src
+}
+
+menu_mirror() {
+    xmirror 2>$LOG && MIRROR_DONE=1
+}
+
+menu() {
+    local AFTER_HOSTNAME
+    if [ -z "$DEFITEM" ]; then
+        DEFITEM="Keyboard"
+    fi
+
+    AFTER_HOSTNAME="Locale"
+    DIALOG --default-item $DEFITEM \
+        --extra-button --extra-label "Settings" \
+        --title " Void Linux installation menu " \
+        --menu "$MENULABEL" 10 70 0 \
+        "Keyboard" "Set system keyboard" \
+        "Network" "Set up the network" \
+        "Source" "Set source installation" \
+        "Mirror" "Select XBPS mirror" \
+        "Hostname" "Set system hostname" \
+        "Locale" "Set system locale" \
+        "Timezone" "Set system time zone" \
+        "RootPassword" "Set system root password" \
+        "UserAccount" "Set primary user name and password" \
+        "BootLoader" "Set disk to install bootloader" \
+        "Partition" "Partition disk(s)" \
+        "Filesystems" "Configure filesystems and mount points" \
+        "Install" "Start installation with saved settings" \
+        "Exit" "Exit installation"
+
+    if [ $? -eq 3 ]; then
+        # Show settings
+        cp $CONF_FILE /tmp/conf_hidden.$$
+        sed -i "s/^ROOTPASSWORD.*/ROOTPASSWORD <-hidden->/" /tmp/conf_hidden.$$
+        sed -i "s/^USERPASSWORD.*/USERPASSWORD <-hidden->/" /tmp/conf_hidden.$$
+        DIALOG --title "Saved settings for installation" --textbox /tmp/conf_hidden.$$ 14 60
+        rm /tmp/conf_hidden.$$
+        return
+    fi
+
+    case $(cat $ANSWER) in
+    "Keyboard") menu_keymap && [ -n "$KEYBOARD_DONE" ] && DEFITEM="Network" ;;
+    "Network") menu_network && [ -n "$NETWORK_DONE" ] && DEFITEM="Source" ;;
+    "Source") menu_source && [ -n "$SOURCE_DONE" ] && DEFITEM="Mirror" ;;
+    "Mirror") menu_mirror && [ -n "$MIRROR_DONE" ] && DEFITEM="Hostname" ;;
+    "Hostname") menu_hostname && [ -n "$HOSTNAME_DONE" ] && DEFITEM="$AFTER_HOSTNAME" ;;
+    "Locale") menu_locale && [ -n "$LOCALE_DONE" ] && DEFITEM="Timezone" ;;
+    "Timezone") menu_timezone && [ -n "$TIMEZONE_DONE" ] && DEFITEM="RootPassword" ;;
+    "RootPassword") menu_rootpassword && [ -n "$ROOTPASSWORD_DONE" ] && DEFITEM="UserAccount" ;;
+    "UserAccount") menu_useraccount && [ -n "$USERLOGIN_DONE" ] && [ -n "$USERPASSWORD_DONE" ] &&
+        DEFITEM="BootLoader" ;;
+    "BootLoader") menu_bootloader && [ -n "$BOOTLOADER_DONE" ] && DEFITEM="Partition" ;;
+    "Partition") menu_partitions && [ -n "$PARTITIONS_DONE" ] && DEFITEM="Filesystems" ;;
+    "Filesystems") menu_filesystems && [ -n "$FILESYSTEMS_DONE" ] && DEFITEM="Install" ;;
+    "Install") menu_install ;;
+    "Exit") DIE ;;
+    *) DIALOG --yesno "Abort Installation?" ${YESNOSIZE} && DIE ;;
+    esac
+}
+
+if ! command -v dialog >/dev/null; then
+    echo "ERROR: missing dialog command, exiting..."
+    exit 1
+fi
+
+if [ "$(id -u)" != "0" ]; then
+    echo "void-installer must run as root" 1>&2
+    exit 1
+fi
+
+while true; do
+    menu
+done
+
+exit 0
+# vim: set ts=4 sw=4 et: