wallenstein/void-packages
1
0
Fork 0
mirror of https://github.com/void-linux/void-packages.git synced 2025-08-03 11:22:56 +02:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

rpi-firmware: update to a newer commit; added rpi specific config files.

Browse source
This commit is contained in:
Juan RP 2013-02-27 23:02:53 +01:00
parent 6be36e34da
commit 43590515b2
3 changed files with 91 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
srcpkgs/rpi-firmware/files/cmdline.txt Executable file
View file

@ -0,0 +1,2 @@
smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=ttyAMA0,115200
kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 loglevel=4 elevator=noop rootwait

80
srcpkgs/rpi-firmware/files/config.txt Executable file
View file

@ -0,0 +1,80 @@
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# for more options see http://elinux.org/RPi_config.txt
## Some over clocking settings, govenor already set to ondemand
##None
#arm_freq=700
#core_freq=250
#sdram_freq=400
#over_voltage=0
##Modest
#arm_freq=800
#core_freq=300
#sdram_freq=400
#over_voltage=0
##Medium
#arm_freq=900
#core_freq=333
#sdram_freq=450
#over_voltage=2
##High
#arm_freq=950
#core_freq=450
#sdram_freq=450
#over_voltage=6
##Turbo
#arm_freq=1000
#core_freq=500
#sdram_freq=500
#over_voltage=6
gpu_mem_512=64
gpu_mem_256=128
cma_lwm=16
cma_hwm=32
cma_offline_start=16

12
srcpkgs/rpi-firmware/template
View file

@ -1,6 +1,6 @@
# Template file for 'rpi-firmware' # Template file for 'rpi-firmware'
pkgname=rpi-firmware pkgname=rpi-firmware
version=20130219 version=20130227
revision=1 revision=1
short_desc="Firmware files for the Raspberry Pi" short_desc="Firmware files for the Raspberry Pi"
maintainer="Juan RP <xtraeme@gmail.com>" maintainer="Juan RP <xtraeme@gmail.com>"
@ -11,14 +11,16 @@ noarch=yes
nofetch=yes nofetch=yes
noextract=yes noextract=yes
conf_files="/boot/cmdline.txt /boot/config.txt"
do_fetch() { do_fetch() {
local url="git://github.com/raspberrypi/firmware.git" local url="git://github.com/raspberrypi/firmware.git"
git clone --depth 1 $url ${pkgname}-${version} git clone --depth 1 $url ${pkgname}-${version}
# Latest commit from 20130219 # Latest commit from 20130226
cd ${pkgname}-${version} cd ${pkgname}-${version}
git checkout 4697c2b07a19f85f297abaf876d6edd1b1085bee git checkout fea69f6e9e7c59fb292a026ff6aead6b17f21738
} }
do_install() { do_install() {
@ -37,4 +39,8 @@ do_install() {
vmove boot/COPYING.linux usr/share/licenses/${pkgname} vmove boot/COPYING.linux usr/share/licenses/${pkgname}
vmove boot/LICENCE.broadcom usr/share/licenses/${pkgname} vmove boot/LICENCE.broadcom usr/share/licenses/${pkgname}
vmove opt/vc/LICENCE usr/share/licenses/${pkgname} vmove opt/vc/LICENCE usr/share/licenses/${pkgname}
# Install configuration files.
vinstall ${FILESDIR}/cmdline.txt 644 boot
vinstall ${FILESDIR}/config.txt 644 boot
} }